Healthcare Plumbing Specialties

Published by: The Part Works, 4/10/2020 4:17 pm

Healthcare presents unique challenges when it comes to maintaining extremely high levels of sanitation within a complex environment. To meet this challenge

Antimicrobial Plumbing Solutions

Published by: The Part Works, 3/30/2020 2:25 pm

With the spread of COVID-19, many individuals and organizations are evaluating options for limiting the spread of pathogens and bacteria in their places of work, play, and residence. Because our team supplies and advises facilities across a range of industries, including healthcare facilities, we’re able to apply leading edge solutions from one industry to another. 

In this series, we’ll explore some of the standards and protocols implemented in the medical facilities we work with which may be applied in schools, office facilities, or residential buildings to reduce the spread of pathogens.

Water Temperature and Antimicrobials

Published by: The Part Works, 3/28/2020 2:53 pm

Hot water at 140 degrees or higher kills bacteria, but code requires that water coming out of a source cannot be hotter than 110 degrees, for safety reasons. Still, water temperature in hospitals is often higher than other non-medical facilities. In many hospitals, boilers are set to 140 degrees, then the temperature is reduced at the faucet or point of use through a thermostatic mixing valve.

Water Filtration

Published by: The Part Works, 3/27/2020 4:23 pm

When it comes to filters, it’s all about how the filter is rated. “A 5 micron filter is a 5 micron filter,” says Chris, “so it’s not a brand choice.” Instead of considering which brand to use in your facility, decide first what you want to filter out, and what you want to let through. This is going to be specific to the application point of use in the facility.

Standing Water and Air Quality

Published by: The Part Works, 3/27/2020 3:28 pm

Often overlooked areas in the plumbing system where microbes can grow are places where air can enter the plumbing system, and standing or stagnant water. These situations can be addressed.

Identifying Touch Points in Your Facility

Published by: The Part Works, 3/27/2020 2:47 pm

To reduce the spread of pathogens including bacteria and viruses, keeping surfaces clean and washing hands are essential. However, those physical surfaces people touch in your facility can be made to either play host to pathogens, or help fight it.

Faucet Outlets: Aerators vs Laminar-Flow

Published by: The Part Works, 3/24/2020 3:29 pm

Air carries microbes, and the use of faucet aerators pulls these microbes into the water you drink and wash your hands with. An aerator draws air into the water stream to make the water feel softer. 


Lucky for you, aerators are not the only way to make your water soft and attractive. Consider a laminar flow, which doesn’t allow any air into the stream but provides the same, soft water effect.

Upgrading Your Facility with Anti-Microbial

Published by: The Part Works, Inc., 3/24/2020 2:31 pm

Upgrading your facility with anti-microbial solutions can take anywhere from a few months -- when property managers and engineers are in agreement on which solutions to apply -- to a few years. 

Establishing a Peformance & Maintenance Plan

Published by: The Part Works, 3/24/2020 2:06 pm

Once you’ve identified the solutions you’ll use for your facility, establish a performance and maintenance plan, or a “P&M Plan.” This ensures that your facility is maintained to the agreed upon standard beyond any near-term COVID-19 concerns.

Guest Post: ADA Compliance for Restooms

Published by: Hydrotek International, 3/4/2020 2:11 pm

ADA, which stands for Americans with Disabilities Act, is a law established in 1990 to ensure that all spaces can be used by everyone, including those with disabilities. What are the requirements to make a lavatory ADA compliant? What products can you use in a ADA compliant lavatory?

Guest Post: Small Steps Equal Big Savings with Water Conservation in Facilities

Published by: T&S Brass, 1/21/2020 10:01 am

As awareness surrounding potential water shortages rises, so too does the urgency for water conservation. Many areas around the world are using water faster than it can be replenished in water basins and other sources and are facing dire threats to water availability. These threats have led many facilities to place water conservation at the forefront of overall sustainability plans. An increasing number of available options are making it easier to prioritize and support sustainability efforts.

Procurement Guide to Ordering Plumbing Parts

Published by: The Part Works, 11/14/2019 11:37 am

We know that when you’re procuring supplies for your facility’s specific plumbing or maintenance needs, it’s about more than just finding the right part. Our customers rely on The Part Works for our short lead time, quick delivery, competitive pricing, and trusted sales team. Below we’ve shared best practices and insight from our procurement customers across the Northwest to help you save money and time. 

Keeping Facilities Running Since 1980

Published by: The Part Works, 9/12/2019 4:35 pm

Over the past 40 years, we’ve worked alongside partners in maintenance and procurement to keep their facilities running smoothly. Now, with leading-edge technology, we’re able to offer additional tools and resources to help you save money and minimize downtime. Read our blog about innovation and growth here at The Part Works for the full story.

Developing an Action Plan for Lead-Free Drinking Water at your Facility

Published by: The Part Works, 6/18/2019 3:12 pm

While the school year is beginning to wind down, many of the facilities we partner with across Washington and Oregon are ramping up efforts to ensure clean and safe drinking water for their students. Check out this month’s blog for helpful insight and tips to help your facility develop an Action Plan for lead-free drinking water.